RASINA Beograd

EL. VEHICLE CHARGING STATION

SOON

Euromet

RASINA - Products - APATOR fuse links

Rasina Katalozi  

PBS 1 Vertical Fuses

Vertical fuse holders PBS 1 are designed for installation on a 185mm Cu busbar system.
Thanks to the PVC housing, they are protected against touch voltage, and the installation and removal of NV1-sized blade cartridges is done using the appropriate.
Connector:
Conductor up to 120mm2
Screw pedal M10

 
       
Rasina Katalozi  

PBS 2 Vertical Fuses

Vertical PBS 2 fuse holders are designed for installation on a 185mm Cu busbar system.
Thanks to the PVC housing, they are protected against contact voltage, and the installation and removal of NV2-sized blade cartridges is performed with the proper tool.
Connector:
Conductor up to 120mm2
Screw pedal M10

 
       
Rasina Katalozi  

PBS 3 Vertical Fuses

Vertical PBS 3 fuse holders are designed for installation on a 185mm Cu busbar system.
Thanks to the PVC housing, they are protected against touch voltage, and the installation and removal of NV3-size blade cartridges is done using the appropriate tool.
Connector:
Conductor up to 240mm2
Screw pedal M12

 
       
Rasina Katalozi  

Vertical ARS 2 fuses

The ARS 2 splitters are designed for mounting on a 185mm Cu busbar system.
There are two different designs - single-pole disassembly and three-pole disassembly by pulling out the blade cartridges in parallel. Intended for use with NV2-size cartridges
Connector:
Conductor up to 120mm2
Screw M10

 
       
Rasina Katalozi  

Vertical ARS 3 fuses

The ARS 3 junction strips are designed for mounting on a 185mm Cu busbar system.
There are two different designs - single-pole disassembly and three-pole disassembly with parallel blade extensions Designed for use with NV3-size cartridges
Connector:
Conductor up to 120mm2
Screw M12

 
       
Rasina Katalozi  

Vertical PBS 00/100 fuses

Vertical fuse holders PBS 00/100 are designed for installation on 100mm Cu busbar systems, but thanks to adapters, they can also be mounted on 185mm busbar busbars.
Thanks to the PVC housing, they are protected against touch voltage, and the installation and removal of Breitling NV00-size blade cartridges is performed using the appropriate.
Connector:
Conductor up to 70mm2
Screw pedal M8

 
       
Rasina Katalozi  

Vertical PBS fuses

Vertical PBS fuses are used for power distribution and protection due to short circuits and overload in a three-phase system. They are designed for direct mounting on horizontal copper busbars as vertical pedestal fuse holders, so they take up less space on the mounting plate compared to conventional pedestals. The PBS vertical disconnector can also be mounted horizontally on vertical copper busbars.

All types of vertical disconnectors have the ability to connect the power cable from both the bottom and the top. This design ensures a safe circuit breaker when replacing the cartridge.

STANDARDS TO BE SATISFIED BY PBS EXHIBITORS:

IEC 947-3, EN 60947-3, PN-93 / E-06150/30, IEC 947-1, EN 60947-1, PN-90 / E-06150/10 IEC 60269-2-1, PN-91 / E-06160/21 IEC 60269-1, PN-91 / E-06160/10 VDE 0660 BBJ Certificate for “B safety mark CE Declaration of Conformity with 73/23 / EEC European Directive

 
       
Rasina Katalozi  

Vertical ARS 1 fuses

The ARS 1 splitters are designed for mounting on a 185mm Cu busbar system.
There are two different designs - single-pole disassembly and three-pole disassembly by pulling out the blade cartridges in parallel. Intended for use with NV1-size cartridges
Connector:
Conductor up to 120mm2
M10 Screw


 
       
Rasina Katalozi  

Vertical fuses ARS 00/100

All types of vertical disconnectors have the ability to connect the power cable from both the bottom and the top. This design ensures a safe circuit breaker when replacing the cartridge.
The ARS 00/100 separator slats are intended for mounting on a 100mm Cu busbar system, but thanks to the adapters, they can also be mounted on a 185mm Cu busbar system, allowing joint assembly with larger fuse bars. Simple manipulation of the lever allows all three poles to be disassembled / fitted at the same time.
Connector: Conductor up to 70mm2

 
       

 


Rasina

Rasina

References

News

Contact

RASINA d.o.o.
Srećka Jovanovića 51a
11235 Mali Požarevac, Sopot

+381 11 6301 279
+381 11 6350 555
+381 64 8207415

office@rasina.com
www.rasina.com