RASINA Beograd

EL. VEHICLE CHARGING STATION

SOON

Euromet

RASINA - Products - APATOR fuse holder

Rasina Katalozi  

Fuse holder RBK

RBK disconnectors are designed to distribute electricity and protect the equipment against short circuits and overloads, using blade fuses. RBK disconnectors consist of a three-pole housing with spring-loaded contacts, and the ability to be connected to copper rails, cables or pedal cables, and a movable cover that also serves as a fuse holder.

STANDARDS TO BE SATISFIED BY RBK DISTRIBUTORS:

PN-93 / E-06150/30 IEC 947-3 PN-91 / E-06160/21 IEC 269-2-1 PN-90 / E-06150/10 IEC 947-1 PN-91 / E-06160/10 IEC 269-1

 
       
Rasina Katalozi  

RBK00 fuse holder

Uređaj širine 106mm za montažu na ploču namenjen za upotrebu sa nožastim osiguračima do 160A, veličine 00.
Priključak:
S - Stezaljke za provodnik 1,5 - 50 mm2
M - Zavrtnjevima za papučicu do 70mm2

 
       
Rasina Katalozi  

RBK00-S fuse holder

106mm wide device for mounting on Cu busbars 60mm apart, intended for use with blade fuses up to 160A, size 00.
Connector:
S - Wire clamps 1.5 - 50 mm2
M - Pedal screws up to 70mm2

 
       
Rasina Katalozi  

RBK000 (C) disconnector

Dimensional device (89mm wide) for mounting on a board designed for use with blade fuses up to 100A, size 000 or 00C.
Connector:
S - Wire clamps 1.5 - 50 mm2
M - Pedal screws up to 70mm2 <

 
       
Rasina Katalozi  

RBK000-S fuse box

Small size device (89mm wide) for mounting on Cu busbars 60mm apart, intended for use with blade fuses up to 100A, size 000 or 00C.


 
       
Rasina Katalozi  

RBK1 disconnector

180mm wide panel mounting device for use with blade fuses up to 250A, NV1 size.
Connector:
S - Wire clamps 70 - 120 mm2 M - Pedal screws up to 120mm2

 
       
Rasina Katalozi  

RBK1-S fuse holder

180mm wide Cu device for Omega replica use with blade fuses up to 250A, NV1 size.
Connector:
S - Wire clamps 70 - 120 mm2 M - Pedal screws up to 120mm2


 
       
Rasina Katalozi  

RBK2 disconnector

250mm fake watches uk device for board mounting, designed for use with blade fuses up to 400A, NV2 size.
Connector:
S - Wire clamps 70 - 185mm2 M - Up to 240mm2 pedal screws

 
       
Rasina Katalozi  

RBK2-S fuse holder

A 250mm wide device for mounting on Cu busbars, intended for use with blade fuses up to 400A, NV2 size.
Connector:
S - Wire clamps 70 - 185 mm2 M - Pedal screws up to 240mm2

 
       
Rasina Katalozi  

RBK3 fuse holder

250mm wide panel mounting device, designed for use with blade fuses up to 630A, NV3 size.
Connector:
S - Wire clamps 90 - 240 mm2
M - Pedal screws up to 240mm2


 
       
Rasina Katalozi  

RBK3-S fuse holder

A 250mm wide device for mounting on Cu busbars, intended for use with knife fuses up to 630A, NV3 size.
Connector:
S - Wire clamps 90 - 240 mm2
M - Pedal screws up to 240mm2


 
       

 


Rasina

Rasina

References

News

Contact

RASINA d.o.o.
Srećka Jovanovića 51a
11235 Mali Požarevac, Sopot

+381 11 6301 279
+381 11 6350 555
+381 64 8207415

office@rasina.com
www.rasina.com